£999.00 (Inc VAT)
£832.50 (Ex VAT). Shipping calculated at checkout.
Special Order Item
Designed by Brad Avenson of Austin, Texas-based Avenson Audio, the Pete`s Place Audio BAC (short for Brad Avenson Compressor) is a feedback-style FET compressor built around two discrete op amps and a custom wound output transformer.
From the top down, the BAC`s faceplate features a large silver rotary input knob, smaller pots for attack, release and ratio, and a large output knob at the bottom. Additional features include a three-position sidechain contour switch, eight-LED gain reduction meter, and pushbuttons for distortion and bypass.
The module`s attack control runs from fast to quite fast, while the release control exhibits a fairly wide range, enabling the compressor to go from "pumping, breathing fast" up to approximately a second and a half. This allows sounds to "hang" a bit when using the device purely as a leveler or limiter.
The ratio control features five positions ranging from 2:1 to 20:1, with a sixth position marked as "∞!". According to Avenson, "The infinity control has a little exclamation point next to it because, not only is it really flat, but it also puts you in that spot where you can do some over-compression and other interesting things. It changes where the threshold starts to compress as well, so it gives you different varieties of tonal characteristics to play with."
The BAC`s sidechain toggle switch offers a choice of three possible settings: flat, high-pass filter (cut off around 70 to 100 Hz), and an option that somewhat exaggerates the high end while simultaneously cutting the low end. "The overall effect of this third setting is somewhat like a de-esser fed into the sidechain, but it`s a little wider than that and quite good for taming a variety of things that are overly bright," Avenson notes.
With all of the controls essentially cranked between the input and output knobs, the BAC is capable of delivering nearly 50 dB of gain, which can be very helpful in compensating for serious gain reduction issues caused by greatly compressing dynamic range.
The bypass button found below the output knob is a true relay bypass, while the adjacent distortion button allows the user to achieve a true bench FET compression sound. "A lot of FET compressors use tricks to linearise the FET as a compression element and make it sound cleaner because if they`re used solely by themselves, they’re really pretty raunchy sounding," says the designer. "So this switch allows you to play with how much of the frequency response and distortion characteristics of the FET you get. By engaging it, you`re getting a lot more second harmonic distortion and aggressive sounds because we`re taking away some of the linearising elements. It`s basically a way to kick in a more aggressive sounding compressor without changing any of the other settings. You can dial in the amount of dirt you want."
UK Mainland – Orders over £99 qualify for FREE standard shipping (1-3 working days) We also offer a range of chargeable express shipping options for next working day, pre 12pm, pre 10.30am, Saturday deliveries and deliveries on a specific date. Our main UK courier is DPD.
UK Non Mainland – Not eligible for free shipping. These areas include (but are not limited to) Isle of Man, Isle of Wight, Isles of Scilly, Jersey, Guernsey, Northern Ireland, Orkney, Scottish Highlands and Shetland. Shipping costs for these ares will be calculated at checkout.
International/Export – Delivery charges will be calculated at checkout. All orders that are in stock we aim to dispatch from our warehouse within 48 hours. We ship all orders outside of the UK, NI, Isle of Man, Channel Islands via Fedex. All prices and delivery charges are exclusive of VAT for export. The customer is responsible to pay for any additional duties and charges.
Read more on our shipping information page
If you have an SX Pro account:
Login, go to your Order History find the invoice for the item you want to return, click on the invoice then select “Request a return”, then select the item and quantity you want to return. This will take you to the returns form, simply fill it in and wait for our response.
No account, or orders prior to 31/03/2021
Simply fill out the returns form on this page and wait for our response.
