£1,582.50 (Ex VAT). Shipping calculated at checkout.
• Parallel insert with M/S function.
• Independent, stepped Mid and Side blend controls.
• Elliptical EQ (low end mono-maker).
• Width control from mono to extra wide.
• Advanced cue function for monitoring at nearly every step in...
Please note that, due to calculations, your monthly repayment may differ very slightly from what you were expecting. Please check your monthly repayment figure before proceeding.
Checkout with finance
To apply for finance, please add the product to your cart, proceed through checkout and select “Omni Capital” as your payment method. You will then be able to complete your application online.
Only available to UK residents over 18, subject to terms and conditions.
Credit subject to status. Missed or late payments may result in additional fees or interest and will affect your credit file and your ability to obtain credit in the future.
• Parallel insert with M/S function. • Independent, stepped Mid and Side blend controls. • Elliptical EQ (low end mono-maker). • Width control from mono to extra wide. • Advanced cue function for monitoring at nearly every step in its path.
The M/S Station is a multi-function mastering and main bus processing tool. The M/S Station is a multi-function mastering and main bus processing tool.
Parallel insert with M/S function: With the insert section you can insert an external processor like an eq, compressor, distortion unit etc, and then dial in a mix between the processed signal (wet) and the unprocessed signal (dry). For maximum precision the blend control has 16 steps from dry to wet. If you activate the M/S function your signal will be coded into mid (L+R) and side (L-R). The mid signal normally contains all the center info such as bass, kick drum, lead vocal etc and the side signal contains all the panned parts of the signal. In M/S you can process the center signal and side signal separately with different types of processors. With the blend split function you get separate blend controls for the mid and side signal. In M/S mode the blend function takes place before the signal is decoded back to left/right. This section can be used with it’s own balanced inputs and outputs.
Elliptical Equalizer: With the elliptical EQ all frequencies below a selected frequency will be made to mono. This function can make your low end more focused. It’s an old technique used when mastering for vinyl. Too much low end in the side channel (vertical) can make the needle bounce slightly and cause distortion. By using a 12dB high pass filter in the side channel you set the frequency under which the signal will be processed as mono. As a HPF introduces phase shift to the signal, a phase correction is added to the mid channel keeping channel separation as good as possible. The EEQ has 16 frequencies from 36Hz to 302Hz. With the EEQ cue function you can monitor the signals that are mixed between the channels.
Stereo width control: By adjusting the amount of side information in the stereo mix, the width can be adjusted incrementally from mono to extra wide. With this control you can fine adjust the stereo image after you have used the M/S insert.
Cue function: With the cue function you can monitor the Left, Right, Mid or Side signal separately by pressing the dedicated button. Insert cue is a function to monitor the Mid or Side blend separately when the M/S function and Split blend is active. The signal is then sent directly from each blend control directly to the outputs, one at a time without passing the EEQ, Width or other gear if the M/S Station is used unlinked.
By selecting the EEQ switch on the cue section you can monitor the low frequencies fed from left to right or right to left. The cue section is a passive design using relays to select the cue source.
Specifications • Max input and output: +26dBu • Dynamic range: 119dB • Frequency response: 20Hz – 80kHz +/-0,1dB
All sections active • Dynamic range: 115,5dB • THD+N: 0,0005% • Power consumption: 15VA • Voltage: 115v or 230v selected via an internal volt selector switch.
Features • Parallel insert • Insert In/Out • Stepped blend controls (16 steps) • M/S function • Blend split for separate blends for Mid and Side
Shipping – For next day delivery you must order before 3.30pm
UK Mainland – Orders over £99 qualify for FREE standard shipping (1-3 working days) We also offer a range of chargeable express shipping options for next working day, pre 12pm, pre 10.30am, Saturday deliveries and deliveries on a specific date. Our main UK courier is DPD.
UK Non Mainland – Not eligible for free shipping. These areas include (but are not limited to) Isle of Man, Isle of Wight, Isles of Scilly, Jersey, Guernsey, Northern Ireland, Orkney, Scottish Highlands and Shetland. Shipping costs for these ares will be calculated at checkout.
International/Export – Delivery charges will be calculated at checkout. All orders that are in stock we aim to dispatch from our warehouse within 48 hours. We ship all orders outside of the UK, NI, Isle of Man, Channel Islands via Fedex. All prices and delivery charges are exclusive of VAT for export. The customer is responsible to pay for any additional duties and charges.
If you have an SX Pro account: Login, go to your Order History find the invoice for the item you want to return, click on the invoice then select “Request a return”, then select the item and quantity you want to return. This will take you to the returns form, simply fill it in and wait for our response.
