£94,950.00 (Ex VAT). Shipping calculated at checkout.
BCM10/2 Mk2
Class-A Legend
Designed in 1969, the classic BCM10’s class-A design, transformer balanced topology delivered ultimate audio performance throughout the golden era of studio recording. The modern BCM10/2 MkII introduces routing & monitoring options for use...
Special Order Item
Please be aware that this item may not be returnable, or a restocking fee may apply. For more information, kindly reach out to one of our team.
Class-A Legend Designed in 1969, the classic BCM10’s class-A design, transformer balanced topology delivered ultimate audio performance throughout the golden era of studio recording. The modern BCM10/2 MkII introduces routing & monitoring options for use in today’s studios, with multiple configurations to allow any artist, producer and engineer to harness the iconic Neve® sound.
Premium Front-End
80-Series Modules The BCM10/2 MkII 80-series module slots can house the classic hand-built 1073®, 1084 preamps or the modern 1073N, each with class A topology and Marinair® Transformers.
1073® Preamps All module options feature the world-famous 1073® preamp, capable of producing up to 80dB of mic gain by layering transistor gain stages on top of each other. This unique design lets you dial in the precise gain levels via the 5dB switch and, if required, drive the preamp to produce subtle harmonic saturation.
Marinair Transformers The BCM’s 1073®, 1084, or 1073N modules use exclusive Marinair® specification transformers to balance the microphone input, line input and output stage, helping to create the unique character of this classic console.
Inductor-Based EQ The three-band EQ from the 1073®, 1084 or 1073N uses exclusive, hand-wound inductors to produce musical, sound sculpting results. This equaliser, complimented with a choke-coupled high pass filter, gives complete control over the frequency spectrum.
Switchable HPF The famous 1073 18dB/octave high pass filter is ideal for cutting out unwanted low frequencies and delivering complete control over the frequency spectrum, with 1084 modules installed, frequency control is enhanced with the addition of a switchable low pass filter.
1073/1084 EQ For those looking for further EQ control, the 1084 modules use the same preamp design as the 1073® but feature an expanded EQ palette with selectable high-frequency bands, low pass filter and mid-band Hi-Q setting.
Modern Bussing & Connectivity
1252 Module The new 1952 channel routing module handles channel bussing and routing, featuring modern switching options for current studio needs.
Switchable Insert Each channel features a switchable, balanced insert, perfect for connecting to a patch bay or directly into outboard processors.
Direct Outputs For tracking or stem mixing, each channel has a direct output with up to +10dB in hand, switchable to pre or post the insert point.
Dual-Path Mixing One of the modern additions to the classic BCM is the simple input feature. This additional transformer-balanced line input transforms the console into an in-line mixer and doubles the consoles channel count when mixing large sessions.
Aux & Cue Sends The modern BCM10/2 Mk II busing system expands upon the capabilities of the original console with four mono pre/post fader aux sends and a stereo cue send, perfect for connecting to outboard FX and performer headphone systems.
P&G Faders Smooth action P&G faders complimented with 7-stage LED metering deliver a precise visual overview of levels when tracking or mixing.
Class-A Topology
Voltage Mixing The BCM10/2 MkII uses voltage mixing across its mix busses; this classic architecture reduces the mix bus gain to be reamplified through the 1272’s to line level. This process creates a ‘pleasant analogue hue compared to modern, transparent, current mixing and forms part of the BCM’s unique sonic character.
1272 Modules The classic Neve® 1272 line amplifier modules have been given new life in the modern BCM10 console. Every 1272 works across its associated mix bus to reamplify the signal similarly to vintage Neve preamps, boosting it through Marinair Transformers.
Class A Discrete The modern BCM 10/2 MkII uses class-A discrete architecture throughout. Neve® engineers painstakingly revived the original circuits to preserve the classic Neve console character.
Transformer-Balanced Design In addition to the Marinair transformers found in the channel modules, almost every input and output to the console is transformer-balanced, including the 1952 A&B line inputs, channel simple inputs, mix bus channel inputs, reverb returns and each 1272 module input & output. In total, a ten-channel BCM10/2 MkII uses 104 Marinair specification transformers!
External PSU In the BCM10/2 MkII, everything is discrete, including the power supply. The quiet running, external 3U 19″ rackmount PSU module can be housed in the control room or a service room, keeping the analogue and power cables separate.
Cherry Oak Finish The BCM10/2 MkII is classic through and through. The console’s side trim and speaker shelf styling use genuine cherry oak sourced from the local area, less than 20 miles from Neve® HQ.
Mix Processing & Routing
Mix Bus Inserts The BCM10/2 MkII includes two stereo mix bus inserts, ideal for custom bus processing final signals, and the IMR blend allows for parallel processing with single-knob controls.
500 Series Slots To further enhance the mix bus processing capabilities of the BCM10/2 MkII, two VPR alliance specification 500 series slots are included, allowing for any 500 series processor to be applied across the mix bus.
Dual D.I Inputs Dual DI inputs with cue send, AFL, and solo isolation can bring additional signals from external mixers into the BCM mix bus or connect an external mixer into the performer cue mix systems.
Dual Reverb Returns Dual reverb returns with stereo width, cue send, AFL, and solo isolation are dedicated systems for connecting outboard FX processors back into the console.
Mute Groups & Smart Switching Global controls for aux on/off & pre/post fade state make session routing simple, plus two independent cut groups for tracking or mixing.
Solo System Three professional destructive and non-destructive solo modes – solo-in-place, after-fader-listen, and pre-fader-listen are perfect tools for tracking, mixing and overdubbing.
Powerful Monitor Controls
Stepped Monitor Control The stepped, triple-gang, gold-plated monitor switch delivers accurate levels for its many possible outputs, including signal blending options and internal and external signal sources. Additional monitor controls – mono sum, individual speaker cuts and variable speaker dim are powerful tools for modern professionals.
5.1 Monitoring The BCM10/2 MkII powerful monitor section features three 5.1 external sources and three stereos. With 5.1 monitor outputs, the BCM can be the centre of any surround system without the need for external monitor controls.
Three Loudspeaker Outputs The BCM10/2 MkII features three loudspeaker outputs, one complete 5.1 system and two stereo outputs; each output has independent trim controls for finely tuning your studio monitoring.
Headphones & SLS System The SLS (studio loudspeaker system) and headphone output have independent source selections, level control and talkback facilities. These outputs can be used as named or as separate cue bus systems.
Talkback & Return Talkback Talkback to cue, SLS and slate allow for seamless communication between engineer and artist, with a two-mode return talkback system for either two-way communication between artist and engineer or three-way between producer, artist and engineer.
Large VU Meters The console centre’s large, backlit VU meters visually reference eleven selectable stereo mix bus signals. The VU meters feature -10dB attenuation allowing for accurate metering when pushing the console mix output.
Shipping – For next day delivery you must order before 3.30pm
UK Mainland – Orders over £99 qualify for FREE standard shipping (1-3 working days) We also offer a range of chargeable express shipping options for next working day, pre 12pm, pre 10.30am, Saturday deliveries and deliveries on a specific date. Our main UK courier is DPD.
UK Non Mainland – Not eligible for free shipping. These areas include (but are not limited to) Isle of Man, Isle of Wight, Isles of Scilly, Jersey, Guernsey, Northern Ireland, Orkney, Scottish Highlands and Shetland. Shipping costs for these ares will be calculated at checkout.
International/Export – Delivery charges will be calculated at checkout. All orders that are in stock we aim to dispatch from our warehouse within 48 hours. We ship all orders outside of the UK, NI, Isle of Man, Channel Islands via Fedex. All prices and delivery charges are exclusive of VAT for export. The customer is responsible to pay for any additional duties and charges.
If you have an SX Pro account: Login, go to your Order History find the invoice for the item you want to return, click on the invoice then select “Request a return”, then select the item and quantity you want to return. This will take you to the returns form, simply fill it in and wait for our response.
