Save 12% £3,750.00 £3,299.00 (Inc VAT)
£2,749.17 (Ex VAT). Shipping calculated at checkout.
The ATC SC S70 Pro is a high-performance 12 ”/ 3 0 0mm active subwoofer, designed from the ground up to deliver the exceptional levels of performance required to partner ATC’s active monitors. Its performance and features make it ideally suited to use within stereo, multi-channel surround and immersive audio systems.The sub features a sealed-box (infinite baffle) design, chosen for its balance of sub-bass extension and driver control. The cabinet is heavy and inert to minimise cabinet colouration. For situations requiring flush mounted/in-wall subwoofers, an in-wall variant, the SCS70iW Pro is available which features a shallower cabinet and a 7 U /19 ” rack mounted remote amplifier. The subwoofer cabinet features a panel mounted in its front face with two LEDs to indicate ‘on’/’limit’ and ‘mute’.
The S S 7 5 - 314 S C driver employed in the SCS70 Pro has been meticulously optimised to reproduce the lowest 3 octaves of the audio band within the design of the SCS70 subwoofer system. It employs a short-coil operating in an exceptionally long magnetic gap to deliver high sound pressure levels with very low levels of distortion.
The SCS70s convection cooled amplifier is mounted in the rear of the SCS70 Pro cabinet. Two balanced inputs enable connection to mono or stereo sources. A pair of buffered, un-filtered balanced outputs are provided for connection to partnering active monitor loudspeakers or to ‘daisy-chain’ multiple subs. 21d B range of gain control, three low pass frequency settings, polarity switch and a 18 0 degree continuously variable phase setting allow the user to optimise the subwoofer for use with a very wide range of partnering loudspeakers. The low pass filter can also be set to ‘Off’ (320Hz) should the user wish to use the SCS70 Pro with external processing. The amplifier features fault monitoring of amp panel temperature and power amplifier D.C offset either fault condition is indicated via illumination of a single red LED mounted on the amp panel.
When in use, the subwoofer output can be muted using a single latching footswitch connected via a ¼”/6.35mm jack. The mute function does not affect the outputs to the primary monitor loudspeakers, only the output from the sub itself. Additional subs cab be muted using the same single footswitch via connection to the mute ‘Thru’ jack.
Acoustic Specification
Low Frequency Cut-off: 22Hz (-6dB, half space, low pass filter set at 80Hz).
Low Pass Filters: 50Hz, 65Hz, 80Hz, 320Hz. (-6dB, 4th order Linkwitz Riley).
MaxSPL: 11 0dB continuous, 11 6dB peak (IEC Weighted Pink Noise, measured at 1m, half space, low pass filter set at 80Hz).
Sensitivity: +4dBu ref 88dBC (single channel driven, Gain +6dB, Level 0dB, pink noise, low pass filter set at 80Hz).
Electronic Specification
Amplifier type: Grounded Source MOSFET based Class A-B, convection cooled.
Output Power: 300W in to 8Ω.
THD+N: <0.003%/-90dB, at 10 0 Hz, 300W into 8Ω over 90kHz bandwidth.
Input CMRR: 90dB at 200Hz.
Input Impedance: Approx. 20kΩΩ(differential).
Output Impedance: Approx. 100ΩΩ(differential).
Frequency Response: <2Hz (-3dB) – 320Hz (-6dB, set by panel-controlled LP filter).
Low Pass Filters: 4th Order Linkwitz Riley
Gain Control: 0, +6dB, +10dB.
Level Control: 0dB -11dB in 1dB steps. Total range 21dB with use of Gain switch.
Phase Control: 0-180° ref. Input.
Polarity Control: In-phase/Out-of-phase ref. Input.
Limiter: ATC Active FET Momentary Gain Reduction, active limiter indicated on front panel.
Sensitivity: 1.55Vrms for full power (single channel driven, Gain 0dB, Level 0dB).
Power Consumption: Idle 8W / 14 VA, 1/ 8th Power 17 0 W / 230VA, Full Power 500W / 600VA.
Mains Input: 220-230V. Factory set. Please observe panel markings and labels.
Additional: Mute via ¼”/ 6.35mm Jack socket, controlled via latching footswitch.
Weight: 44Kg.
UK Mainland – Orders over £99 qualify for FREE standard shipping (1-3 working days) We also offer a range of chargeable express shipping options for next working day, pre 12pm, pre 10.30am, Saturday deliveries and deliveries on a specific date. Our main UK courier is DPD.
UK Non Mainland – Not eligible for free shipping. These areas include (but are not limited to) Isle of Man, Isle of Wight, Isles of Scilly, Jersey, Guernsey, Northern Ireland, Orkney, Scottish Highlands and Shetland. Shipping costs for these ares will be calculated at checkout.
International/Export – Delivery charges will be calculated at checkout. All orders that are in stock we aim to dispatch from our warehouse within 48 hours. We ship all orders outside of the UK, NI, Isle of Man, Channel Islands via Fedex. All prices and delivery charges are exclusive of VAT for export. The customer is responsible to pay for any additional duties and charges.
Read more on our shipping information page
If you have an SX Pro account:
Login, go to your Order History find the invoice for the item you want to return, click on the invoice then select “Request a return”, then select the item and quantity you want to return. This will take you to the returns form, simply fill it in and wait for our response.
No account, or orders prior to 31/03/2021
Simply fill out the returns form on this page and wait for our response.
