{"product_id":"pmc-6-single","title":"PMC 6 (Single)","description":"\u003cp\u003eThe PMC6 is packed with innovation and providing the same sonic signature as our renowned larger monitors, it’s ideal for smaller control rooms or for use in larger immersive systems, where its astounding resolution allows critical mix decisions to be made with absolute confidence.\u003c\/p\u003e\n\n\u003cp\u003eWith 20mm of excursion, the bespoke 6-inch bass driver is designed specifically to integrate with our latest ATL™ bass-loading and Laminair™ airflow technologies. The combination outperforms most 8-inch monitors, offering unparalleled bass extension, headroom, dynamics, and low distortion at all levels. The high end is courtesy of a one-inch precision-built fabric soft-dome tweeter, with a shallow waveguide that creates wide, tonally consistent dispersion and rock-solid imaging. Both the bass and treble drivers are precisely and individually controlled by a pair of 200W ultra-low-distortion, high-damping-factor Class-D amplifiers.\u003c\/p\u003e\n\n\u003cp\u003eWhether in portrait or landscape placement, the PMC6’s sophisticated DSP engine automatically adjusts the crossover, ensuring optimum tonal accuracy, phase and imaging.\u003c\/p\u003e\n\n\u003cp\u003eThe monitor can be calibrated using the rear-panel controls or with PMC’s intuitive browser-accessible SoundAlign™ software. The PMC6 can be upgraded by adding a PMC8 SUB to create a full-range, free-standing PMC6 XBD system. Activating the ‘XBD’ DSP mode ensures the perfect marriage of the two units, creating a clean LF extension down to 25Hz.\u003c\/p\u003e\n\n\u003cp\u003eActive 2-way nearfield reference monitor with ATL™ bass loading\u003cbr\u003e\nFrequency response: 39Hz - 25kHz (- 3dB @1m full space, on-axis)\u003cbr\u003e\nMax. cont. SPL: 106dB @1m (half space value calculated as +3dB from full space measurement.\u003cbr\u003e\nUn-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)\u003cbr\u003e\nState-of-the-art Class-D amplifiers: HF 200W, LF 200W\u003cbr\u003e\nAnalogue\/AES3 digital input (16\/24-bit, 18 -192kHz sample rate)\u003cbr\u003e\nDigital ‘through’ output (AES3 24-bit 96kHz)\u003cbr\u003e\nSoundAlign™ network control interface for single or group EQ \u0026amp; settings\u003cbr\u003e\nSophisticated DSP crossover, driver protection, EQ, and delay\/polarity options\u003cbr\u003e\nAutomatic portrait\/landscape placement DSP correction\u003cbr\u003e\nPMC6 + PMC8 SUB creates PMC6 XBD, with LF down to 25Hz\u003cbr\u003e\nCeiling-mount yoke allows suspension in multi-channel or immersive systems\u003cbr\u003e\nSpecifications\u003cbr\u003e\nType: Active 2-way nearfield reference monitor with ATL™ bass loading\u003cbr\u003e\nDrive Unit Complement\u003cbr\u003e\nLF PMC 150mm (6”) studio 6 driver\u003cbr\u003e\nHF PMC 27mm (1”) soft dome tweeter\u003cbr\u003e\nEffective ATL™ Length1.8m (5.9ft)\u003cbr\u003e\nFrequency Response 39Hz - 25kHz (- 3dB) (@1m full space, on-axis)\u003cbr\u003e\nSensitivity+4dBu input signal = 98dB SPL @ 1m\u003cbr\u003e\nMax continuous SPL106dB @1m\u003cbr\u003e\n(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)\u003cbr\u003e\nMax Peak SPL118dB @1m\u003cbr\u003e\n(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)\u003cbr\u003e\nDirectivity\u003cbr\u003e\nH +\/-60 degrees\u003cbr\u003e\nV +50\/-40 degrees (-6dB off axis @10kHz)\u003cbr\u003e\nInput XLR switchable between analogue \u0026amp; digital AES3\u003cbr\u003e\nAnalogue input\u003cbr\u003e\n+20\/+24dBu max. input level (selectable)\u003cbr\u003e\n22K ohm input impedance\u003cbr\u003e\nDigital input\u003cbr\u003e\n16\/24-bit AES3 signal, left, right or left + right\u003cbr\u003e\n18 - 192kHz sample rate\u003cbr\u003e\n110 ohm input impedance\u003cbr\u003e\nExpansion card slot\u003cbr\u003e\nFor future connectivity upgrades\u003cbr\u003e\nOutput\u003cbr\u003e\nXLR digital AES3 (fixed 24-bit @ 96kHz)\u003cbr\u003e\nNetwork RJ45 for use with PMC SoundAlign web interface\u003cbr\u003e\nFeatures Level\u003cbr\u003e\nTrim (+\/-10dB)\u003cbr\u003e\nOrientation (portrait, landscape, auto)\u003cbr\u003e\nHigh-pass filter (20 - 200Hz, 12dB\/Oct)\u003cbr\u003e\nDelay (0 - 30mS)\u003cbr\u003e\nPhase (normal or inverted)\u003cbr\u003e\nLF \u0026amp; HF shelving filters (20Hz - 20kHz, +\/- 10dB, Q 0.707)\u003cbr\u003e\nParametric EQ (5 bands, 20Hz - 20kHz, +\/- 10dB)\u003cbr\u003e\nUser presets (3 + factory defaults)\u003cbr\u003e\nLatency 2.4mS\u003cbr\u003e\nAmplifier power per channel\u003cbr\u003e\nLF 1 x 200Wrms\u003cbr\u003e\nHF1 x 200Wrms\u003c\/p\u003e","brand":"PMC","offers":[{"title":"Default Title","offer_id":57960002158975,"sku":"51453","price":3197.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1008\/1216\/1407\/files\/51453-1.jpg?v=1783942606","url":"https:\/\/sxpro.co.uk\/products\/pmc-6-single","provider":"SX Pro","version":"1.0","type":"link"}